Cleco DGD 946823D7 handleiding
Handleiding
Je bekijkt pagina 21 van 54
21
P1713E-EN
2013-12
EN
3.2 First Operation
3.2.1 Note
When operating for the first time, observe and comply with the Operator information mPro400… as well.
Connect the built-in nutsetter to the nutsetter control unit mPro400….
The maximum cable length is 50 m.
The built-in nutsetter can be equipped with a straight, offset, or angle attachment. The offset attachments /
angle attachments can include an integrated transducer, depending on whether it is needed.
The assemblies are positioned via crown geared interfaces. The assemblies of size 1 can be rotated in 15°
steps, and sizes 2 to 4 in 10° steps.
3.2.2 Torque / Angle Setting
Parameters are entered via the nutsetter control unit mPro400….
Bekijk gratis de handleiding van Cleco DGD 946823D7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | DGD 946823D7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5397 MB |
