Cleco 22V5040 handleiding
Handleiding
Je bekijkt pagina 10 van 24
Page 10
45-8062EN
07/10/2013
Cleco
®
22 Series Rotary Vane Motors
5 Before initial operation
5.1 Ambient conditions
Ambient temperature: 41°F (5°C) to a maximum of 104°F (40°C)
Acceptable relative humidity: 25% to 90%, non-condensing
5.2 Air supply
To attain consistent results, maintain a constant working pressure using a suitable air line unit consisting
of a lter, lubricator and regulator.
ÚThe inside diameter of the air hose must be free of residue, clean if necessary.
ÚIf a line lubricator is used, it should be filled daily
5.3 Connecting the air supply to the tool
---------------------------------------------------------------------------------------------------------------------------------------
The air hose can disconnect from the motor by itself and whip around uncontrollably.
ÚTurn off the compressed air before connecting to the motor.
ÚSecurely connect the air hose to the motor.
ÚTurn on the compressed air.
---------------------------------------------------------------------------------------------------------------------------------------
5.4 Tool set up
The motor must be congured for the application.
Parameter Description
Air Hose
Air inlet: 1/4" (6,4 mm)
5/16" I.D. Air Hose: Maximum length run of 10.0' (3 m)
3/8" I.D. Air Hose: Runs over 10.0' (3 m)
Working pressure range
60 to 100 psi (414 to 689 kPa)
Recommended: 90 psi (620 kPa)
Compressed air
Air quality according to ISO 8573-1, quality class 2.4.3
The compressed air must be clean and dry.
Bekijk gratis de handleiding van Cleco 22V5040, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | 22V5040 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2827 MB |
