ClearOne Converge Pro 840T handleiding
Handleiding
Je bekijkt pagina 90 van 366
85
• Feedback: Launches the Feedback window.
• This feature allows you to reduce feedback through a simple configuration window.
1. Enable Feedback Cancellation: Enables or Disables the feature.
2. Automatic Setup: Creates notch filters based on your choice of Feedback Cancellation settings.
» Target Gain Before Feedback: Set your desired dB rating. The unit slowly increases dB,
adding notch filters at detected feedback frequencies until it either reaches the target level
or reaches the number of Fixed Filters (specified in the Filter Settings - Number of Fixed
Filters). The system detects feedback through an open mic while levels are increased. If the
target is reached without using the specified number of fixed filters, the remaining “slots” are
used as Dynamic Filters to be applied as the environment changes.
» Feedback Controls:
• Reset Feedback Eliminator: Clicking Reset clears all settings related to this feature.
• Reset Dynamic Nodes: Clicking Reset only clears dynamic filters; Fixed Filters remain
in place.
» Status: Reports the number of Fixed and Dynamic nodes. A total of 16 nodes can be used,
regardless of type.
• Node Report: Creates a text report listing existing node details.
Bekijk gratis de handleiding van ClearOne Converge Pro 840T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Pro 840T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 58248 MB |
Caratteristiche Prodotto
| Gewicht | 3.3375 g |
| Aantal Ethernet LAN (RJ-45)-poorten | 2 |
| RS-232 port | 1 |
| Ingangsspanning | 100 - 240 V |
| Frequentie | 50/60 Hz |
