ClearOne Converge Pro 840T handleiding
Handleiding
Je bekijkt pagina 53 van 366
48
NOTE: Windows automatically detects the device and begins the USB device driver installation.
This process occurs the first time a new CONVERGE/CONVERGE Pro model is connected
to the system, and once when you switch to a different USB port on the system. If you
install drivers for a model and subsequently connect another model to the system via
USB, Windows will repeat the installation process for the new device type.
12. When the Found New Hardware Wizard appears, select the No, not this time radio button. Click Next to
begin installation.
13. Select the Install the software automatically radio button in the second screen of the wizard (shown
below), then click Next to proceed with installation.
14. When the Windows unsigned driver warning dialog appears, proceed to install the drivers.
15. When the USB driver installation is complete, click Finish to close the wizard.
16. If you will be using IP to run Console, connect Ethernet cables between your LAN and CONVERGE/
CONVERGE Pro device(s).
Bekijk gratis de handleiding van ClearOne Converge Pro 840T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Pro 840T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 58248 MB |
Caratteristiche Prodotto
| Gewicht | 3.3375 g |
| Aantal Ethernet LAN (RJ-45)-poorten | 2 |
| RS-232 port | 1 |
| Ingangsspanning | 100 - 240 V |
| Frequentie | 50/60 Hz |
