ClearOne Converge Pro 840T handleiding
Handleiding
Je bekijkt pagina 48 van 366
43
Setting Channel Gain and Mute
The procedure for setting gain and mute is the same for all channel types:
1. Use the Menu Dial to highlight Gain or Mute
2. Press the Select button
3. Select the desired value using the Menu Dial
4. Press the Select button to set the selected value
5. Press the Esc button to return to the Channels menu
NOTE: When mute is set to on for a mic input channel, the Microphone-On LED for that channel
illuminates red on the front panel.
For more information, see the Table of Contents for these related topics:
• LCD Programming Overview
• LCD Channels Menu
• LCD Settings Menu
• LCD Macros Menu
• LCD Presets Menu
• Controls and Connections
• Mic Input Settings
• Line Input Settings
• Output Settings
• Process Settings
• Fader Settings
• Telco/VoIP Tx Settings
• Telco/VoIP Rx Settings
• Pwr Amp
LCD SETTINGS MENU
The LCD Settings Menu allows you to configure serial port settings and Device IDs, view network IP settings,
change the LCD contrast level, and restore factory default settings for a unit.
Accessing the Settings Menu
To access the Settings menu, press the Select button on the front panel, use the Menu Dial to select Settings,
and press the Select button.
The Settings menu appears as shown below:
SETTINGS PAGE 1/2
RS232
Network
DefaultDID
Bekijk gratis de handleiding van ClearOne Converge Pro 840T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Pro 840T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 58248 MB |
Caratteristiche Prodotto
| Gewicht | 3.3375 g |
| Aantal Ethernet LAN (RJ-45)-poorten | 2 |
| RS-232 port | 1 |
| Ingangsspanning | 100 - 240 V |
| Frequentie | 50/60 Hz |
