ClearOne Converge Pro 840T handleiding
Handleiding
Je bekijkt pagina 43 van 366
38
3. Use the Menu Dial to highlight DID. Press the Select button. The Device ID menu appears.
DEVICE ID MENU
4
2
3
1
0
5
6
4. Use the Menu Dial to highlight the desired value. Press the Select button to select it.
5. The Change DID Menu prompt appears. Choose Yes to set the selected DID value, or No to return to the
Device ID menu.
CHANGING DID MENU
Change DID to
4?
No
Yes
6. Press Esc until to return to the Settings menu.
7. Repeat this process for each device on the E-bus network.
NOTE: You can also set Device IDs in the Unit Properties screen in Console (when
disconnected). However, DID assignments made in Console must match the DID
assignments made using the front panel.
Assigning Beamforming Microphone Array Device IDs
Set each Beamforming Microphone Array unit within the site to a unique ID using the Device ID selector rotary
switch on the back of the unit. (Range 0-F)
Bekijk gratis de handleiding van ClearOne Converge Pro 840T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Pro 840T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 58248 MB |
Caratteristiche Prodotto
| Gewicht | 3.3375 g |
| Aantal Ethernet LAN (RJ-45)-poorten | 2 |
| RS-232 port | 1 |
| Ingangsspanning | 100 - 240 V |
| Frequentie | 50/60 Hz |
