ClearOne Converge Matrix handleiding
Handleiding
Je bekijkt pagina 22 van 24
20 technical Support: 800.283.5936
SynchronizinG the conVerGe matrix
While connected to the CONVERGE Matrix, changes made on the “Live” CONVERGE Matrix unit
can be synchronized back into the configuration file created in Console so they are not lost.
Click on the Copy Live Values icon to initiate copying the changed live values back into the
solution file configurations.
REDUNDANCY OPERATION
Redundancy allows two identical CONVERGE Matrix boxes to be connected to the networks and
configured so that in the event of failure of the Main unit, the Redundant unit seamlessly assumes
all functions and so passing of audio over the network is not interrupted.
This connection of the Main and Redundant units are as shown in the following illustration:
» Note: Network, power and other connections are not shown for simplicity.
The redundant unit configuration will be added in the future release of the CONVERGE Matrix
Console Software. Currently it can be performed by Serial commands. Details of this operation
are included in the CONVERGE Matrix Serial Command Guide.
MAIN Matrix Unit
REDUNDANT Matrix Unit
Main Unit Link OUT goes to
Redundant Unit Link IN
RS-232 Port
Connection
Set ID Switch to 0
Set ID Switch to 1
Bekijk gratis de handleiding van ClearOne Converge Matrix, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Matrix |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4222 MB |
