ClearOne Converge Matrix handleiding
Handleiding
Je bekijkt pagina 12 van 24
10 technical Support: 800.283.5936
macro commandS
The Macros tab provides a way to build macro commands to control the device for different
configurations. A Command Wizard allows a way to build commands one at a time. Once a
command has been configured it can be manually edited to change its values. If a command is not
valid the green check mark will change to a red x until the command has been corrected.
Macros can be ran from the software once the file has been pushed to a device.
Gpio control and StatuS
The GPIO port allows the CONVERGE Matrix to label signals on port control pins and the status
pins. This allows Event Actions along with Serial Commands to be used to manage the unit. Serial
Commands are detailed in a separate CONVERGE Matrix Serial Command Guide. The GPIO
screen shows the pin assignments and names, along with a naming tool.
Bekijk gratis de handleiding van ClearOne Converge Matrix, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Matrix |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4222 MB |
