ClearOne Converge Matrix handleiding
Handleiding
Je bekijkt pagina 10 van 24
8 technical Support: 800.283.5936
Navigating to the System>Stack Settings page provides an area where you can supply a custom
Username and Password. The defaults are ‘clearone’ and ‘converge’ respectively.
SETTING UP RESOURCES
The Resources area under Edit File allows you to create channel groups, macros, timers, GPIO
labels, and channel labels. This includes the microphone inputs and outputs. Dante-based inputs
and outputs are not created in the CONVERGE Matrix, but are used by the CONVERGE Matrix for
grouping, switching, macros, and other operations.
The Dante Controller software, provided by Audinate™, is used to discover, control, and configure
all devices and services on the Dante network. This software and its documentation can be obtained
from the ClearOne website:
http://www.clearone.com/resources#professional_audio
CONVERGE Matrix Console utilizes name dependent Endpoint Architecture when combining
resources. Once a name is selected, it is best practice not to change it or it could create invalid
commands.
naminG tool
A naming tool is provided to aid with multiple names with a similar base.
Setting a Base Name will allow the renaming of all microphone and/or line outputs with the base
and then an increasing number.
Bekijk gratis de handleiding van ClearOne Converge Matrix, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ClearOne |
| Model | Converge Matrix |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4222 MB |
