Cleanmaxx 14969 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 32
EN
13
SAFETY DEVICES
The device has two safety switches (8,12).
The UV-C lamp (10) only switches on if
both safety switches are pressed into the
motor unit (3) (automatic switch-off func-
tion of the UV-C lamp deactivated). This
happens automatically when the device
is placed on a flat surface. If the safety
switches lose contact with the surface
below, the automatic switch-off function
is activated and the UV-C lamp stops
being lit (automatic switch-off function of
the UV-C lamp activated).
TIPS AND NOTES
Always clean mattresses on both sides.
We recommend cleaning new
mattresses once a month. Older
mattresses should initially be cleaned
every day for a week. We then recom-
mend cleaning them once a month.
The filter should be replaced every
12 18 months; the UV-C lamp (10)
should be replaced every 12 – 24
months. If you have any questions
about spare parts, please contact the
customer service department via our
website:
www.ds-group.de/kundenservice
USE
Please Note!
The device should only be used if it
has been fully and correctly assembled!
The dust container and the filter must
be inserted and must not be damaged!
If the dirt were to get inside the motor
unit, this could damage the motor.
Make sure that the safety switches of
the UV-C lamp are not blocked!
Always test the device first on a small,
inconspicuous spot.
1. Insert the mains plug into a properly
installed plug socket that is easily
accessible.
2. Place the device down flat on the
surface which is to be cleaned.
3. Press the On / Off switch (1) to switch
on the device. The device starts
to vacuum and the UV-C lamp (10)
switches on.
L
You can look through the viewing
window (4) to check whether the
UV-C lamp is switched on.
4. Press the vibration button (14) to
activate the vibration head (9).
L
The vibration shakes up the
surface which is to be cleaned
and the dust which is agitated
is sucked in through the suction
opening (13).
5. Guide the device very slowly and
evenly over the surface to be cleaned.
6. After vacuuming, press the On / Off
switch to switch off the device.
7. Remove the mains plug from the plug
socket.
12399_02243_14969_Inlay_DE-EN-FR-NL_A5_V2.indb 1312399_02243_14969_Inlay_DE-EN-FR-NL_A5_V2.indb 13 10.06.2024 12:42:3010.06.2024 12:42:30

Bekijk gratis de handleiding van Cleanmaxx 14969, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCleanmaxx
Model14969
CategorieStofzuiger
TaalNederlands
Grootte3873 MB