Cleanmaxx 12401 handleiding
Handleiding
Je bekijkt pagina 16 van 44
EN
16
ACCESSORIES
The floor nozzle (F) is suitable for both
carpets and hard floors.
The foot switch allows you to change be-
tween carpet and hard floor. For hard floors,
a brush is extended on the underside of the
floor nozzle. The floor nozzle can only be
used with the extension tube(D).
The combi nozzle (B) is a combination of
asmall crevice nozzle and brush nozzle.
Press the release button on the brush attach-
ment and slide it upwards at the same time
to turn the crevice nozzle into a brush nozzle
(PictureC). The brush attachment must be
heard to engage in place:
○ The crevice nozzle is suitable for
upholstery, cleaning the inside of cars
and for all nooks and crannies.
○ The brush nozzle is used for vacuuming
upholstery and textiles and for remov-
ing dust from delicate objects such as
picture frames, lamp shades, keyboards,
books etc.
The crevice nozzle (A) is suitable for places
which are hard to get to, such as corners,
crevices or recesses. Upholstery and all nooks
and crannies that cannot be reached with
other nozzles. The crevice nozzle can only be
used with the motor unit (C).
The extension tube(D) is intended to be
used with the floor nozzle (F) for cleaning
floors (PictureD). In addition, it makes it
easier to reach ceilings and corners.
The nozzle adapter (E) is required to
attach the combi nozzle (B) to the extension
tube(D).
The wall mounting bracket (G) is suita-
ble for storing the device in a space-saving
manner.
USE
Please Note!
■ Make sure that there are no large, sharp
objects on the surface which is to be
cleaned.
■ Note the MAX marking of the dust con-
tainer. If the marking is reached during
use, empty the dust container. Empty
and clean the dust container after every
use. The filters must also be regularly
cleaned in order to prevent overloading
of the motor.
■ Switch off the device after you finish
cleaning each surface to increase the
operating time on each battery charge.
L
The device cannot be operated
when it is connected to the mains
power. Disconnect the connecting
cable(H) prior to use.
1. Select a nozzle (see the “Accessories”
chapter) and plug it into the suction
opening(11). You must hear it engage.
For a longer reach, plug the extension
tube(D) in between.
To pull a nozzle or the extension tube out
again, press the release button(12).
2. Switch on the device and guide the
nozzle over the area to be cleaned. To
switch on at suction levelI, press the
On / Off switch (3) once. If it is pressed
again, the suction power increases to
level 2.
3. To switch off the device, press the
On / Off switch a third time.
L
To ensure optimum performance of
the device, empty and if necessary
clean the dust container after every
use (see next chapter).
12401_Inlay_DE-EN-FR-NL_A5_V1.indb 1612401_Inlay_DE-EN-FR-NL_A5_V1.indb 16 14.04.2023 13:49:0114.04.2023 13:49:01
Bekijk gratis de handleiding van Cleanmaxx 12401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleanmaxx |
| Model | 12401 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4815 MB |
