Cleanmaxx 02243 handleiding

40 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 40
17 EN
3. Press the On / O switch (1) to switch on the device. The device starts to vacuum and
the UV-C lamp (10) switches on.
You can look through the viewing window (4) to check whether the UV-C lamp
is switched on.
4. Press the vibration button (14) to activate the vibration head (9).
The vibration shakes up the surface which is to be cleaned and the dust which
is agitated is sucked in through the suction opening (13).
5. Guide the device over the surface to be cleaned.
6. After vacuuming, press the On / O switch to switch o the device.
7. Remove the mains plug from the plug socket.
Cleaning and Storage
PLEASE NOTE!
Empty the dust container each time after you use the device. The lters must also be
regularly cleaned in order to prevent overloading of the motor.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These can damage the surface.
Make sure that the mains plug has been pulled out and the device is disconnected
from the power.
As required, wipe down the motor unit with a damp soft cloth. Then dry it with a soft
cloth.
Wipe out the recess for the dust container (5) with a duster.
Store the device in a dry, cool place that is not accessible to children and animals.
Emptying the Dust Container
1. Reach into the recess in the dust container (5) and pull it up and out of the motor
unit (3).
2. Reach into the opening and pull the lters out of the dust container.
3. Empty the dust container.
4. Wipe out the dust container with a dry duster if necessary.
Cleaning the Dust and HEPA Filters
5. Unscrew the dust lter (15) anticlockwise until the arrow
on the dust lter points to the open padlock symbol (see
picture).
6. Detach the dust lter from the HEPA lter (16).
7. Tap out both lters and clean them with a soft brush if
necessary. Please note: For thorough cleaning the lters
can be rinsed under cold (!) running water.
NOTICE: Allow both lters to dry completely before the
device is reassembled.

Bekijk gratis de handleiding van Cleanmaxx 02243, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCleanmaxx
Model02243
CategorieStofzuiger
TaalNederlands
Grootte4584 MB