Clean Air Optima CA-904G Smart handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129/ 129

Afdrukken

Je bekijkt pagina 10 van 129

10

Remote control

1. Open the battery cover at the back side of remote control to place the battery.

(see Picture 1).

2. To place the battery: there is a “security tab” at the bottom of the remote control that you

first have to slide to the right and then pull out the battery holder. (see Picture 2).

Insert the battery with the correct polarity. (see Picture 3).

3. Push the battery cover back into the remote control.

Remote control Battery cover

(Picture 1) (Picture 2)

(Picture 3) Battery (CR2032)

Cleaning & Maintenance

Unplug the heater before each maintenance and make sure the heater has cooled down.

If necessary you can use a soft cloth with a neutral cleaning product dissolved in warm water

(below 50°C) to clean the outer side of the fan. Dry carefully.

To avoid damaging the device, do not use aggressive cleaning agents to clean the surface

of the heater.

To store the heater, place it in a dry and ventilated place.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129/ 129

Bekijk gratis de handleiding van Clean Air Optima CA-904G Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Heater