Clean Air Optima CA-510 Pro Smart Handleiding (224 Pagina's)

Handleiding

/ 224

Je bekijkt pagina 18 van 224

18

How to use (Filter installation for the front and the back)

The device needs to be positioned at least 30 cm from walls and furniture to obtain a good

airﬂow. Make sure that the air in-and outlets are not blocked.

1. Disassemble the panel

Press on the red indicated icon

on the left and right side on the

air puriﬁer with both ﬁngers, see

ﬁgure. Pull the panel towards you

like indicated by the blue arrows.

2. Install the composite ﬁlter

Remove the sealing from

theﬁlters. Place the ﬁlters

back into the device. The tap

onthebottum and the top must

be visible at the front (The HEPA

side from the ﬁlter is visible).

3. Install the Pre-ﬁlter

Install the Pre-ﬁlter with the black

bulge outward. Put its lower part

into the bottom slot and push

thetop (with the arrows on it)

gently into the upper slot.

4. Install the panel

Push the front panel parallel along

the upper and lower edges in the

direction shown in blue, see ﬁgure.

When you are hearing a click,

thenthe panel is installed.

/ 224

Bekijk gratis de handleiding van Clean Air Optima CA-510 Pro Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.