Claypaky Tambora Stormy Linear CL2024 handleiding
Handleiding
Je bekijkt pagina 5 van 12
5
TAMBORA STORMY LINEAR
Continue
‘
Connections to the power mains - Fig. 5
Power
Supply
2
1
3
2
1
Connecting and disconnecting the power cord - Fig. 4
4
5
DMX 512
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Ethernet
Connections to the control signal line (DMX) - Fig. 6
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. End connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield
braid and pin 1 of the connectors.
6
3.3 Connecting to mains supply
3.4 Connecting the control signal line: DMX / Art-Net
Bekijk gratis de handleiding van Claypaky Tambora Stormy Linear CL2024, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Claypaky |
| Model | Tambora Stormy Linear CL2024 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1899 MB |
