Clarion S400 handleiding
Handleiding
Je bekijkt pagina 8 van 38
9
relay harness wire connection guide
relay harness wiring diagram
___
___
___
___
___
___
___
___
**NNOOTTEE::
VIOLET and VIOLET/BLACK are common at fuse holder.
relay harness wiring instructions
H2/A RED/WHITE input to on-board channel 2 (trunk release) relay
This wire is used to supply voltage to the output H1/12. If you want a positive output on H1/12, con-
nect this wire to (+) 12 volts. Always fuse appropriately. If a negative output is desired, connect this
wire to chassis ground.
H2/B BLACK/WHITE input to domelight supervision relay
This wire is used to supply voltage to the output H1/4. If you want a positive output on H1/4, connect
this wire to (+) 12 volts. Always fuse appropriately. If a negative output is desired, connect this wire to
chassis ground.
H2/C - H2/8 power door locks
The system has door lock relays on-board, and can directly interface with most electric power door lock
systems drawing 30 amps or less. It can also drive aftermarket actuators directly.
VIOLET* Unlock #87 Normally Open (Input)
BLUE/BLACK Unlock #30 Common (Output)
BROWN/BLACK Unlock #87a Normally Closed
VIOLET/BLACK* Lock #87 Normally Open (Input)
GREEN/BLACK Lock #30 Common (Output)
WHITE/BLACK Lock #87a Normally Closed
BLACK/WHITE DomeLight Supervision relay Input #87
RED/WHITE Channel 2 Relay Input #87
H2/A
H2/B
H2/C
H2/D
H2/E
H2/F
H2/G
H2/H
Bekijk gratis de handleiding van Clarion S400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Clarion |
| Model | S400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2698 MB |
