Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 9 van 72
WARNING
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks or severe burns. The electrode and work circuit is electrically live
whenever the output is on. The input power circuit and machine internal circuits are also live when power is on.
In semiautomatic or automatic wire welding, the wire, wire reel, drive roll housing, and all metal parts touching the
welding wire are electrically live. Incorrectly installed or improperly grounded equipment is a hazard.
ELECTRIC SHOCK
1. Do not touch live electrical parts.
2. Wear dry, hole-free insulating gloves and body protection.
3. Insulate yourself from work and ground using dry
insulating mats or covers.
4. Disconnect input power or stop engine before installing
or servicing this equipment. Lock input power disconnect
switch open, or remove line fuses so power cannot be
turned on accidentally.
5. Properly install and ground this equipment according to its
Operating Manual and national, state, and local codes.
6. Turn off all equipment when not in use. Disconnect power
to equipment if it will be left unattended or out of service.
7. Use fully insulated electrode holders. Never dip holder in
water to cool it or lay it down on the ground or the work
surface. Do not touch holders connected to two welding
machines at the same time or touch other people with the
holder or electrode.
8. Do not use worn, damaged, undersized, or poorly
spliced cables.
9. Do not wrap cables around your body.
10. Ground the workpiece to a good electrical (earth) ground.
11. Do not touch electrode while in contact with the work
(ground) circuit.
12. Use only well-maintained equipment. Repair or replace
damaged parts at once.
13. In conned spaces or damp locations, do not use a
welder with AC output unless it is equipped with a voltage
reducer. Use equipment with DC output.
14. Wear a safety harness to prevent falling if working
above oor level.
15. Keep all panels and covers securely in place.
OPERATING MANUAL BLUEVENOM 4R-ROVER
CIGWELD.COM.AU | 9
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
