Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 16 van 72
2.05 DESCRIPTION
The new BlueVenom4R-ROVER Digital Wirefeeder has been
engineered to be as compact a 300mm spool feeder can be.
With a low line carry handle the 4R-ROVER can t in the most
tight and constrained spaces.
The 4R-ROVER does just that –your wire feed companion ready
to go where you need it. Its robust design coupled with an 8m
interconnection cable and in-built hanging mount, allows the
user to position the feeder conveniently to make the job easy
–on the welding machine, oor, bench, gantry or boom setups!
2.06 USER RESPONSIBILITY
This equipment will perform as per the information contained
herein when installed, operated, maintained and repaired in
accordance with the instructions provided. This equipment
must be checked periodically. Defective equipment (including
welding leads) should not be used. Parts that are broken,
missing, partly worn, distorted or contaminated, should be
replaced immediately. Should such repairs or replacements
become necessary, it is recommended that such repairs be
carried out by appropriately qualied persons approved by
CIGWELD. Advice in this regard can be obtained by contacting
an accredited CIGWELD Distributor/service agent.
This equipment or any of its parts should not be altered
from standard specication without prior written approval
of CIGWELD. The user of this equipment shall have the
sole responsibility for any malfunction which results from
improper use or unauthorised modication from standard
specication, faulty maintenance, damage or improper
repair by anyone other than appropriately qualied persons
approved by CIGWELD.
2.07 WHAT’S IN THE BOX
BLUEVENOM 4R-R0VER (Part No. W3200401)
• BLUEVENOM 4R-ROVER Wirefeeder
• Feed Rolls: 0.9/1.2mm V Groove (tted)
• 8m Interconnection Lead
• Operating Manual
NOTE
Refer to the complete Warranty Schedule at the
back of the manual.
2.08 TRANSPORTING METHODS
This unit is equipped with a handle for carrying purposes.
ELECTRICAL WARNING
ELECTRIC SHOCK can kill.
DO NOT TOUCH live electrical parts.
Disconnect input power conductors from de-
energized supply line before moving the welding
power source.
WARNING
FALLING EQUIPMENT can cause serious personal
injury and equipment damage
16 | CIGWELD.COM.AU
OPERATING MANUALBLUEVENOM 4R-ROVER
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
