Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 12 van 72
MOVING PARTS
WARNING
MOVING PARTS CAN CAUSE INJURY.
Moving parts, such as fans, rotors, and belts can cut
ngers and hands and catch loose clothing.
1. Keep all doors, panels, covers, and guards closed and
securely in place.
2. Stop engine before installing or connecting unit.
3. Have only qualied people remove guards or covers for
maintenance and troubleshooting as necessary.
4. To prevent accidental starting during servicing, disconnect
negative (-) battery cable from battery.
5. Keep hands, hair, loose clothing, and tools away from
moving parts.
6. Reinstall panels or guards and close doors when servicing
is nished and before starting engine.
WARNING
This product, when used for welding or
cutting,produces fumes or gases which contain
chemicals known to the State of California to cause
birth defects and, in some cases, cancer. (California
Health & Safety code Sec. 25249.5 et seq.)
NOTE
Considerations About Welding And The Effects of
Low Frequency Electric and Magnetic Fields.
FLYING SPARKS AND HOT METAL
WARNING
FLYING SPARKS & HOT METAL CAN CAUSE INJURY.
Sparks and spatter y off from the welding arc.
The ying sparks and hot metal, weld spatter, hot
workpiece, and hot equipment can cause res
and burns. Accidental contact of electrode or
welding wire to metal objects can cause sparks,
overheating, or re.
1. Wear approved face shield or safety goggles.
Side shields recommended.
2. Wear proper body protection to protect skin.
CYLINDERS
WARNING
CYLINDERS CAN EXPLODE IF DAMAGED.
Shielding gas cylinders contain gas under high
pressure. If damaged, a cylinder can explode. Since
gas cylinders are normally part of the welding
process, be sure to treat them carefully.
1. Protect compressed gas cylinders from excessive heat,
mechanical shocks, and arcs.
2. Install and secure cylinders in an upright position by
chaining them to a stationary support or equipment
cylinder rack to prevent falling or tipping.
3. Keep cylinders away from any welding or other
electrical circuits.
4. Never allow a welding electrode to touch any cylinder.
5. Use only correct shielding gas cylinders, regulators, hoses,
and ttings designed for the specic application; maintain
them and associated parts in good condition.
6. Turn face away from valve outlet when opening cylinder valve.
7. Keep protective cap in place over valve except when
cylinder is in use or connected for use.
8. Read and follow instructions on compressed gas cylinders,
associated equipment, and CGA publication P-1 listed in
Safety Standards.
12 | CIGWELD.COM.AU
OPERATING MANUALBLUEVENOM 4R-ROVER
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
