Handleiding
Je bekijkt pagina 34 van 108
EN
ELECTRICAL CONNECTION
This hob must be connected to the mains power supply only by
a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the hob.
2. the voltage corresponds to the value given in the rating plate
3. the power supply cable sections can withstand the load specified on
the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is
suitable without alterations. Any alterations must only be made
by a qualified electrician.
The power supply should be connected in compliance with the relevant
standard. The method of connection is shown below.
• If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid any
accidents.
• If the appliance is being connected directly to the main supply, an
Omani polar circuit-breaker must be installed with a minimum opening
of 3mm between contacts.
• The installer must ensure that the correct electrical connection has
been made and that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorized
technicians only.
32
Bekijk gratis de handleiding van Ciarra CDB392BEH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ciarra |
| Model | CDB392BEH |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9274 MB |
