Ciarra CBHCF516-W handleiding
Handleiding
Je bekijkt pagina 4 van 16
Connect the power, the buzzer sounds once, and the product enters standby mode;
Long press the mountain key for 2 seconds, the buzzer will sound once, the standby indicator light will
turn on, and the gear indicator light will turn white. The product will enter the first natural wind mode;
When the wind speed function is set to level 1 and the cold air is working, press and hold the mountain
key for 2 seconds to turn off the device. The buzzer will sound once, all indicator lights will turn off, all
functions will be turned off, and the heater will enter standby mode;
When the wind speed function is in 2nd or 3rd mode and the warm air is working, press and hold the
mountain key for 2 seconds to turn off the device. The buzzer will sound once, and the standby indicator
light will flash. The fan will work for a delay of 20 seconds before synchronously turning off.
Press the button lightly while in working mode, the buzzer will sound once, the timer indicator light will
turn white, and the timer will start working for 6 hours; Press the light button again, the buzzer will sound
once, the timer indicator light will turn off, and the timer function will be turned off. Repeat this process.
After booting up, the product defaults to the 1st level cold air mode, and the gear indicator light is white;
Afterwards, short press the button to switch gears, and the gear indicator light will display the corresponding
color: natural wind in gear 1- low hot air in gear 2- high hot air in gear 3 in this cycle.
Usage Guide
Body panel
Power on/standby button
Timer key
Wind speed key
Overheating and
power outage
safeguard
Power on/standby button
Standby indicator light Timer indicator light Gear indicator light
Timer key Wind speed key
When the temperature control switch detects that the temperature is too high during
operation, it will immediately disconnect the PTC power supply to stop heating. When
the temperature returns to normal, the PTC power supply will be turned on again. If the
temperature continues to rise too high, the fuse in the PTC power supply line will melt,
and the PTC heating element will be cut off and enter a protective state.
3
EN
Bekijk gratis de handleiding van Ciarra CBHCF516-W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ciarra |
| Model | CBHCF516-W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1166 MB |
