Chiq WFL85T48W2 handleiding
Handleiding
Je bekijkt pagina 22 van 32
How to use the appliance
21
Before loading your first load of
laundry
Your new appliance was tested before leaving the
factory. This process involves running various wash
cycles. As a result, a small amount of water may
remain in the tub and drainage system. Run a Drum
Clean cycle with no laundry and no detergent to
clean the system before your first load of laundry.
Daily use
Preparing the laundry
EMPTY POCKETS
Coins, paper clips, etc. could damage the load
and the washing machine components.
Tissues will break down during the wash cycle
and the fragments will have to be subsequently
removed by hand.
CLOSE ALL ZIPPERS, BUTTONS, AND HOOKS. TIE
ALL RIBBONS OR BELTS
Insert the smaller garments (e.g. nylon hosiery,
belts, etc.) and garments with hooks (e.g.
braziers) into a fabric bag or a pillowcase with
zipper. Remove any rings from curtains, or else
place the curtains inside a fabric bag together
with the rings.
FABRIC TYPE/SYMBOL ON THE WASH LABEL
Cottons, mixed fibres, easy care/synthetics, wool,
hand wash items.
Color
Separate colored and white items. Wash new
colored articles separate.
Size
Wash items of different sizes in the same wash
load, to improve washing efficiency and
distribution of the articles in the drum.
Delicates
Wash delicate items separately; they require
gentle treatment.
How to use the appliance
1. Load laundry
Open the door and load the laundry. Load the
articles one at a time loosely into the drum,
without overfilling. Observe the load sizes given
in the “Table of wash cycle”, Overloading the
machine will result in unsatisfactory washing
results and creased laundry.
2. Close door
Make sure that no laundry gets stuck between
door glass and rubber seal. Close the door so that
you can hear it click shut.
3. Open water tap
Make sure that the appliance is connected to the
water mains. Open the water tap.
4. Set the desired program
Press and hold the POWER button to turn the
appliance on. Select the required program by
pressing the POWER button. The duration of the
wash cycle is shown on the display. The washer
automatically displays the default temperature
and spin speed settings possible for the selected
program. Adjust the temperature and/or spin
speed setting if needed with the relative buttons.
Change temperature, if needed
Press the TEMP. button to progressively lower
the temperature setting until cold wash has been
set (“－－“will be shown on the digital display).
Pressing the button again sets the highest
possible setting.
Change spin speed, if needed
Press the SPEED button to progressively decrease
the spin speed until the spin cycle is turned off
(“－－“ will be shown on the digital display).
Pressing the button again sets the highest
possible setting.
Select options, if needed
Press the button(s) to select the option; the
corresponding option indicator light on the
display is lit.
Press the button(s) again to cancel the option,
the corresponding option indicator light goes out.
Bekijk gratis de handleiding van Chiq WFL85T48W2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chiq |
| Model | WFL85T48W2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5679 MB |
