Handleiding
Je bekijkt pagina 5 van 14
3
Disposal
The environment and personal safety must be considered when disposing of this
appliance. Please ensure the appliance is taken to a recycle center for safe recycling. DO
NOT dispose of the appliance in land fill as the insulation and refrigerant gas contained
in these appliances are flammable.
Door reversal instruction
There is no spare parts required for door reversal job.
The following tool is required, flat screwdriver, phillips screwdriver, adjustable spanner,
socket wrench and 8mm socket.
1. Make sure that your refrigerator is unplugged.
2. Use a flat screwdriver to remove the hinge cover, remove the three screws that secure
the upper hinge, then remove the upper hinge.
3.Remove the freezer door from the cabinet.
4. Remove the two screws that secure the center hinge.
5.Remove the refrigerator compartment door.
6. Remove the four screws that secure the lower hinge to the right side of the cabinet,
then remove the hinge.
7. Remove the washer and nut that secure the pin shaft to the right hole on the lower
hinge, then remove the shaft and pin screw.
8. Insert the pin screw into the right hole and insert the pin shaft into the left hole on
the lower hinge, then secure the shaft with the washer and nut.
Bekijk gratis de handleiding van Chiq CTM347NB5E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chiq |
| Model | CTM347NB5E |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1804 MB |
