Handleiding
Je bekijkt pagina 12 van 16
10
function gets exited. Cooling down the freezer temperature in a rapid manner is good
for the prevention against food nutrition loss and the preservation of freshness.
When the fast-freezing function is active, the Freezer temperature is subject to no
change.
2) To enter “Fast Freezing”.
Press and hold Care+ key for 3 seconds when Function setting mode is active. Press
care+ key (short press) to make Fast Freezing icon flickering, then press the “OK” key
to active the function or wait for 5 seconds with the icon of “Fast Freezing” stays On.
3) To exit “Fast Freezing”.
After a cumulative running period of 26 hours, the fast-freezing function will exit
automatically.
When the Fast Freezing function is active, press and hold Care+ key for 3 seconds to
enter function mode, press Care+ key (short press) until the icon of Fast Freezing
starts flickering, and then press the “OK” key or wait for 5 seconds to validate the
setting, with the icon of “Fast Freezing” go off.
Alternatively, Quick press Freezer key twice, the unit will exit the Fast Freezing mode.
Door open alarm
If any door is opened for more than 3 minutes, buzzer alarm will be continuously
beeping. It can be stopped by pressing any key button, but will be restored after 3
minutes if the door keeps opening.
The alarm will stop when the doors are closed properly.
Power cut memory
In the case of power failure, the refrigerator will maintain the previous setting when
the power supply is restored.
Power-on delay
In order to protect the compressor from being damaged in the case of short-time
power failure (i.e., less than 5 minutes), the compressor will not be started
immediately after it is powered on. But it will restart after power comes back on for
more than 5 minutes.
Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is
higher than -10℃, digits of the freezer zone get flickering on the display. The freezer
temperature can be displayed when any key is pressed, and the normal display will
be restored when any key is pressed again or after 10s.
Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the display panel, it indicates fault
with the refrigerator. Please contact CHIQ service centre for a service call.
Bekijk gratis de handleiding van Chiq CCD598NWS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chiq |
| Model | CCD598NWS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1864 MB |
