Chauvin Arnoux L461 handleiding
Handleiding
Je bekijkt pagina 14 van 48
14
3. OPERATION
Before recording, the instrument must be congured. This involves the following steps:
■ L461: Select an AC or DC signal.
■ Establish a Wi-Fi link with the PC (this link is not essential if you are using a USB link).
■ L411 and L412: set the rated primary current.
■ Select the aggregation period.
■ Choose the type of recording.
■ It is also possible to reset the conguration.
This conguration is made in Conguration mode (see § 3.2) or with the Data Logger Transfer application software (see § 5).
To connect the instrument to the PC, you can use the USB link or the Wi-Fi link (to be congured).
In order to avoid accidental changes, the instrument cannot be congured while recording or if there is a recording pending.
3.1. TURNING THE INSTRUMENT ON AND OFF
To start the instrument, press and hold the On/O button.
TTo turn the instrument o, press and hold the On/O button again. The instrument cannot be turned o while a recording is in
progress or pending, or when the device is connected to an external power supply.
When the instrument is running on batteries, it turns o automatically after a period with no keypad activity and no recording in
progress. This time is set using the Data Logger Transfer application software.
It is also possible to switch the instrument to permanent mode, with Data Logger Transfer. The symbol is displayed and the
appliance no longer turns o.
If there is no action by the user, the instrument switches to standby mode after three minutes, this duration can be programmed at
3, 10 or 15 minutes via the Data Logger Transfer application software. It continues to make measurements but they are no longer
displayed.
The blue display backlight turns on at startup. It turns o after one minute. It turns on again when a key is pressed or when the
USB is connected.
3.2. CONFIGURING THE INSTRUMENT
Several main functions can be congured directly on the instrument. For full conguration, use the Data Logger Transfer software
application (see § 5).
To enter Conguration mode from the instrument, press the ◄ or ► keys until the
symbol is selected.
One of the following two screens will appear:
Figure 8
If the instrument is already being congured from the Data Logger Transfer software, it is not possible to enter Conguration
mode on the instrument. In this case, when an attempt is made to congure it, the instrument displays LOCK.
Bekijk gratis de handleiding van Chauvin Arnoux L461, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chauvin Arnoux |
| Model | L461 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4956 MB |
