Chauvin Arnoux C177A handleiding
Handleiding
Je bekijkt pagina 10 van 44
10
WARNING, risk of DANGER! The operator must refer to these instruc‑
tions whenever this danger symbol appears.
Equipment protected by double insulation.
Application or withdrawal authorized on bare conductors carrying
dangerous voltages. Type A current sensor as per IEC 61010‑2‑032.
Voltage limiter.
The arrow identifies the phase of the current/phase conductor.
The CE marking indicates conformity with European directives, in par‑
ticular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European
Union, the product must undergo selective disposal in compliance with
Directive WEEE 2002/96/EC. This equipment must not be treated as
household waste.
Definition of measurement categories:
Measurement category IV corresponds to measurements taken at the source of
low‑voltage installations.
Example: power feeders, counters and protection devices.
Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit‑breakers, machines or fixed industrial devices.
Measurement category II corresponds to measurements taken on circuits directly
connected to low‑voltage installations.
Example: power supply to electro‑domestic devices and portable tools.
ENGLISH
Thank you for purchasing a C177A or MN77 AC current clamp. These current
clamps should be used with the C.A 6113, C.A 6116 and C.A 6117 installation testers.
To obtain the best service from your unit:
read these operating instructions carefully,
comply with the precautions for use.
Bekijk gratis de handleiding van Chauvin Arnoux C177A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chauvin Arnoux |
| Model | C177A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2734 MB |
