Chauvet STRIKE Saber 10 handleiding
Handleiding
Je bekijkt pagina 3 van 12
EN
2
STRIKE Saber 10 QRG Rev. 1
QUICK REFERENCE GUIDE
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Power Linking
It is possible to power link STRIKE Saber 10 products. See the table below for the current draw at each voltage and
frequency:
Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the Safety Notes. Use at least 2 mounting points per product. Make sure the mounting
clamps are capable of supporting the weight of the product. For the Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps
.
Mounting Diagram
Control Panel Description
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz
Current Draw 1.83 A 1.52 A 0.86 A 0.78 A 0.75 A
Button Function
<Menu> Exits the current menu or function
<Enter> Enables the currently displayed menu or sets a selected value into a function
<Up> Navigates upwards through the menu or increases the numeric value of a function
<Down> Navigates downwards through the menu or decreases the numeric value of a function
Mounting clamp
Overhead mounting
Surface mounting
Safety cable
Bekijk gratis de handleiding van Chauvet STRIKE Saber 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chauvet |
| Model | STRIKE Saber 10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1654 MB |
