Chauvet Freedom Flex Stick Battery handleiding

Niet gecategoriseerd

Chauvet

31 pagina's

PDF beschikbaar

Handleiding

Freedom Flex Stick X4 and Freedom Flex Stick Battery User Manual

Setup

3. Setup

AC Power

The Freedom Flex Stick X4 and Freedom Flex Stick Battery has an external power supply and it can work

with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

AC Plug

This product can be connected to a dimmer or rheostat, by plugging in to a standard outlet controlled by a

dimmer or rheostat, or by splicing the power cable and connecting to the included track adapter.

Battery Power

The Freedom Flex Stick X4 and Freedom Flex Stick Battery comes with a rechargeable lithium battery for

cable-free operation.

Charging the Battery

The battery charges whenever the Freedom Flex Stick X4 and Freedom Flex Stick Battery is plugged into

a power source using the included power cable. If the product is plugged in and not in operation, make

sure the product is turned off.

Battery Status Indicator

The battery status indicator on the top of the battery shows how much battery life remains available. The

table below provides a key to reading the battery status indicator.

Battery Run Time

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or

fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green/Silver

• Before charging the product, read and follow the Battery Charge Notes

• The battery status indicator light will flash if units are overcharged.

• DO NOT use the Freedom Flex Stick (X4) on full power mode (all LEDs at 100%) while

being charged/plugged into a power source, as the unit will get extremely hot.

• If connecting multiple Freedom Flex batteries, ensure that both batteries are off while

doing so

Indicator Battery Status

Green (solid) High (about 67–100%)

Green (flashing) Medium (about 34–66%)

Red (solid) Low (less than 33%)

Red (flashing) Very low

Maximum Run Time

(all colors on)

Maximum Run Time

(single color on)

Recharge Time

Up to 6 hours Up to 8 hours 3 hours

Bekijk gratis de handleiding van Chauvet Freedom Flex Stick Battery, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.