Chapin 61800 handleiding
Handleiding
Je bekijkt pagina 8 van 36
7E
DISASSEMBLING AND REPAIRING THE PUMP ASSEMBLY
Figure 1
In-Tank
Filter
1. Release the pressure from the sprayer and remove all liquid from
both the pressure chamber and tank.
2. Remove the In-tank filter from the pressure chamber (fig. 1).
3. Remove hose (fig. 2).
4. Remove 2 bolts attaching the pivot lever to the pump shaft and
remove piston assembly (fig. 3).
5. Remove the 2 bolts holding back spine/frame (fig. 4), and the back
spine/frame will come off.
6. Rock the pressure chamber back and forth and push down to free it
from the tank (fig 5). Once freed the entire pump assembly can
be removed.
7. The pressure chamber o-ring can be replaced. DO NOT stretch
the o-ring over the bottom flange. Assemble the o-ring over the top
of the chamber. Apply petroleum jelly to the o-ring before
reinstalling pump assembly into the tank (fig. 6).
8. To inspect piston and/or piston cylinder components, remove
protective dust cap (fig. 7 ).
9. Remove the piston (fig. 8) and inspect for wear. See next page for
further repair instructions.
10. Reassemble in reverse of removal. Note: there is a notch/tab
combination in the pump assembly/tank to be used for
alignment (fig. 9).
Tank tab
Pump
Assembly
Notch
Figure 2
Figure 3
Figure 4
Figure 5
Pressure
Chamber
o-ring
Pump
Assembly
Figure 6
Figure 7
Figure 8 Figure 9
Chapin Backpack Sprayer Operator’s Manual - English
Protective
Dust Cap
Bekijk gratis de handleiding van Chapin 61800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chapin |
| Model | 61800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7610 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 4200 g |
| Inhoud | 15100 ml |
| Werkdruk | 6 bar |
