Champion DH3000 handleiding
Handleiding
Je bekijkt pagina 41 van 79
CLEANING AND MAINTENANCECLEANING AND MAINTENANCE
CLEANING
(section end)
TO CLEAN THE DISHWASHER:
1. Push the power button OFF. The electric drain valve
will open and the machine will drain. The drain valve
will remain open for 10 minutes.
2. Pushing the power button on and immediately off will
open the drain valve for another 10 minutes.
3. Open the door and flush the interior with fresh water.
4. Remove the upper and lower wash and rinse spray
arms and flush with clean water.
5. Check the rinse spray arm nozzles. If necessary,
remove the end plugs and clean the nozzles with a
small paper clip (see Fig. 49). Flush the arms clean
and replace the end plugs.
6. Remove the scrap screens and pump strainer Flush and back flush the screens in a sink.
7. Clean the drain in the bottom of the wash tank.
8. Clean the float switch.
9. Clean the detergent probe with a non-metallic green Scotch Brite™ scrub pad.
10. Wipe the interior with a soft cloth.
11. Reinstall the scrap screens and spray arms making sure the spray arms spin freely.
12. Wipe the machine exterior clean with a soft cloth and mild detergent.
13. Leave the doors open to aid in overnight drying of the machine interior.
CLEAN THE MACHINE AT THE END OF EACH MEAL PERIOD
OR AFTER EVERY 2 HOURS OF CONTINUOUS OPERATION
AND AT THE END OF THE DAY.
WARNING
Dishwasher surfaces may be hot. Use caution when cleaning the machine.
NOTICE
Do not strike the screens against hard surfaces.
CAUTION
DO NOT FLUSH THE EXTERIOR OF THE MACHINE WITH WATER.
Paper Clip
End
Plug
Wash Spray arm
Rinse Arm Spindle
Fig. 49 - Clean end plugs and nozzles
41
Bekijk gratis de handleiding van Champion DH3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | DH3000 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9847 MB |
