Champion CG208 handleiding
Handleiding
Je bekijkt pagina 21 van 50
13
Troubleshooting
Problem Cause(s) Solution(s)
Water sprays our the front of
the glasswasher.
Splash curtain is missing,
positioned incorrectly, or damaged.
Spray arm(s) are damaged or
missing.
Glass(es) interferes with splash
curtain.
Clogged spray arm(s) makes water
come out in wrong direction.
Re-install the splash curtain or
replace the splash curtain.
Replace spray arm(s).
Reload glass(es).
Clean the spray arm(s).
Poor washing results. Water volume from wash and/or
rinse spray arm(s) low.
Water level in detergent tank low.
Water level float ball stuck or filling
with water.
Water level switch defective.
Detergent and/or rinse-aid supply
low.
Wash pump and/or water valve(s)
and/or line strainers clogged or
defective.
Detergent tank temperature low.
Chemical injectors out of
adjustment.
Clean spray arm(s).
Re-install drain/overflow tube
in wash tank. Service Agent
must adjust water level switch
until water level is below top of
overflow.
Clean float ball, replace if
filling with water.
Authorized Service Agent may
replace switch.
Refill chemical supplies.
Authorized Service Agent may
replace wash pump and/or
solenoid valve(s). Clean line
strainers.
Raise incoming water
temperature or adjust
thermostat for 140°F/60°C in
detergent tank.
Contact chemical supplier to
calibrate settings.
Chemical supply container(s)
fill with water.
Peristaltic tube(s) are stretched or
worn on the glasswasher chemical
pumps.
Flow control washer in cold water
solenoid valve is defective.
Inspect and replace tube(s).
Contact Service Agent to
repair solenoid valve.
Bekijk gratis de handleiding van Champion CG208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | CG208 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4960 MB |
