Champion 80HD PRO handleiding
Handleiding
Je bekijkt pagina 16 van 26
8
Installation
Cold Water Connection
Drain Water Tempering, (DWT), Valve
COLD
WATER
INSTALL A 1/2" OR LARGER SHUT-OFF VALVE IN THE WATER SUPPLY LINE
AS CLOSE TO THE DISHWASHER AS POSSIBLE FOR SERVICING.
WATER SUPPLY CONNECTION IS LOCATED NEAR A MACHINE CORNER
AT THE BASE OF THE DISHWASHER.
WATER HARDNESS OF 3 GRAINS/US GAL - 0.83 IMP GAL -5.3mg/L or LESS.
CAUTION: To prevent damage to the dishwasher supply valves, the installing plumber must thoroughly
flush debris from the water supply line before connecting it to the dishwasher. Damage caused by improper
installation is not covered by the limited warranty.
MINIMUM INCOMING
WATER TEMPERATURE
MAXIMUM INCOMING
SUPPLY
PRESSURE
60 PSI/414 kPa
36°F/ 2°C
MINIMUM 1/2" NPT COLD WATER SUPPLY LINE.
CONNECT A 1/2" NPT DRAIN LINE TO THE MECHANICAL DWT DEVICE (Fig. 7a).
Fig. 7a - Mechanical DWT Valve
Fig. 7b - Icon Water Conditioner Installed
CONNECT A 1/2" NPT HOT WATER
SUPPLY LINE TO THE INSTALLED
ION WATER CONDITIONER. (SEE
FACTORY FOR PROPER SIZE.
THE MECHANICAL DWT DEVICE
(Fig. 7a).
ION Water Conditioner
Bekijk gratis de handleiding van Champion 80HD PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | 80HD PRO |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6543 MB |
