Chamberlain CHU48C handleiding
Handleiding
Je bekijkt pagina 7 van 57
7
Program Keypad to Garage Door Opener Using a Program Button
IMPORTANT: Read through all programming steps before you start.
IMPORTANT: Have your garage door opener product manual available for
the location of the button and steps required to place your garage door
opener into programming mode. See page 4 for more information.
01
Simultaneously press and
hold the 0and3 buttons on
the keypad until the blue
LEDs stay solid (typically 6
seconds), then release the
buttons.
02
Set your garage door opener
into programming mode.
LEARN
Button
LEARN Button
LEARN Button
03
15 Seconds
Within 15 seconds of setting
your garage door opener
into programming mode, on
your keypad enter a 4-digit
personal identication
number (PIN) and press the
HOME button three times.
X3
WARNING: Your garage door opener light might ash and your garage door
will move.
04
3 Seconds
When your garage door
moves, within 3 seconds,
press and release the HOME
button.
To test your keypad has programmed successfully tap here.
Examples:
Bekijk gratis de handleiding van Chamberlain CHU48C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CHU48C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11039 MB |
