Chamberlain CHU48C handleiding
Handleiding
Je bekijkt pagina 16 van 57
16
Program a Temporary PIN
IMPORTANT: This feature is only available with Chamberlain, LiftMaster,
Craftsman, and Raynor garage door openers with yellow, purple (brown),
orange, and red LEARN buttons.
Yellow Purple (Brown) Orange
Red Green
NOTE: The myQ app is required for setting temporary PINs for Chamberlain, LiftMaster,
Craftsman, and Raynor garage door openers with a white LEARN button. For instructions
to connect to the myQ app tap here.
A temporary 4-digit personal identication number (PIN) can be programmed to allow
guest access.
The temporary PIN can be set for a number of hours or a number of door openings.
The temporary PIN cannot be the same as any previously programmed permanent PIN.
Option 1: Set a Temporary PIN for Number of Hours
IMPORTANT: Each step below must be started within 15 seconds
of completion of the previous step. Read through all programming
steps before you start.
01
Enter any programmed permanent
PIN (do not press the HOME
button), and within 5 seconds
simultaneously press and hold
the 0 and 2 buttons on the keypad
for six seconds until the garage
door opener light ashes and/or
clicks three times, then release the
buttons.
.
X3
"CLICK"
"CLICK"
"CLICK"
02
Enter the temporary 4-digit PIN of
your choice, then press the HOME
button. The garage door opener
light will ash and/or click four
times.
X4
"CLICK"
"CLICK"
"CLICK"
"CLICK"
03
Enter the number of hours the
temporary PIN will work (1 to 255),
then simultaneously press and
release the 0 and 2 buttons. The
garage door opener light will ash
and/or click once.
X1
"CLICK"
TEST FOR SUCCESS: With the garage door closed, enter the temporary PIN you just
programmed and press the HOME button. The garage door opener will open the door.
NOTE: Clear the temporary PIN by repeating steps 1 through 3, and set the number of
hours to 0 at step3.
Bekijk gratis de handleiding van Chamberlain CHU48C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CHU48C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11039 MB |
