Chamberlain CHU48C handleiding

57 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 57
14
Keypad Features
The garage door opener activates when you press the personal identication number (PIN)
and HOME button. The keypad will ash for 15 seconds. During that time the HOME button
can be used to stop, start, or reverse the door.
If you enter the intended PIN number incorrectly, press the X button to cancel (this can also
be done after pressing the HOME button). Then enter the correct PIN number and HOME
button to activate the garage door opener.
Multiple permanent PINs can be programmed to your garage door opener. To add
additional permanent PINs, follow the same instructions as the rst permanent PIN.
One Button Close
CLOSE your garage door by pressing only the HOME button instead of entering your PIN.
IMPORTANT: This feature is only available with Chamberlain, LiftMaster,
Craftsman, and Raynor garage door openers with white, yellow, purple
(brown), orange, and red LEARN buttons.
Yellow Purple (Brown) Orange
Red
White
To deactivate one button close:
Press and hold the 0 and 9 buttons for 10 seconds. The
keypad LEDs will ash four times when the one button
close feature is deactivated.
To activate one button close:
Press and hold the 0 and 9 buttons for 10 seconds. The
keypad LEDs will ash twice when the one button close
feature is activated.

Bekijk gratis de handleiding van Chamberlain CHU48C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkChamberlain
ModelCHU48C
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11039 MB