Chamberlain CH363C handleiding
Handleiding
Je bekijkt pagina 6 van 15
6
Program Remote to Garage Door Opener with a Yellow LEARN Button Using
the Control Panel
Yellow
IMPORTANT: Read through all programming steps before you start.
01
Press and hold the two
smaller buttons on the remote
simultaneously until the red LED
stays on (typically 6 seconds).
02
Follow the instructions below for your control panel model to set your garage
door opener into programming mode.
Control Panel Push Button Door Control Smart Control Panel
OR
X2
Push
Button
Light
Button
2
3
1
Lift the push bar. Press the
LEARN button twice. The
LED on the door control
panel will pulse repeatedly.
Press and hold the light button,
then press and release the
push button. The button LED
will begin to ash.
1. Select MENU.
2. Scroll down and select PROGRAM.
3. Scroll down and select REMOTE.
Do not follow on screen
instructions.
MOVE DIRECTLY TO STEP 03
.
03
20 Seconds
Within 20 seconds of
pressing the LEARN button,
press and release the remote
button you would like to
program twice. The red LED
will ash intermittently.
X2
X2
WARNING: Your garage door opener light will ash and your garage door will
move.
04
3 Seconds
When your garage door moves,
within 3 seconds, press and
release any remote button.
To test your remote has programmed successfully tap here.
Bekijk gratis de handleiding van Chamberlain CH363C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH363C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2698 MB |
