Chamberlain CH363C handleiding
Handleiding
Je bekijkt pagina 10 van 15
10
Program Remote to Garage Door Opener with a White LEARN Button Using
the Control Panel
IMPORTANT: Read through all programming steps before you start
01
Follow the instructions below for your control panel model to set your garage door
opener into programming mode.
Control Panel Push Button Door Control Smart Control Panel
X2
Push
Button
Light
Button
12:00
PM
Lift the push bar. Press the
LEARN button twice. The
LED on the door control
panel will pulse repeatedly.
Press and hold the light
button, then press and
release the push button. The
button LED will begin to ash.
Select MENU, then select
PROGRAM and follow on
screen instructions.
02
30 Seconds
Within 30 seconds, press and
hold the remote button that you
would like to program. Release
the button when the garage
door opener lights ash and/or
two clicks are heard.
"CLICK"
"CLICK"
To test your remote has programmed successfully tap here.
White
Bekijk gratis de handleiding van Chamberlain CH363C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH363C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2698 MB |
