Chamberlain CH348C handleiding
Handleiding
Je bekijkt pagina 14 van 48
14
Option 2: Set Temporary PIN for Number of Openings
IMPORTANT: Each step below must be started within 15 seconds
of completion of the previous step. Read through all programming
steps before you start.
01
Enter any programmed permanent
PIN (do not press the HOME
button), and within 5 seconds
simultaneously press and hold
the 0 and 2 buttons on the keypad
for six seconds until the garage
door opener light ashes and/or
clicks three times, then release the
buttons.
.
X3
"CLICK"
"CLICK"
"CLICK"
02
Enter the temporary 4-digit PIN of
your choice, then press the HOME
button. The garage door opener
light will ash and/or click four
times.
03
Enter the number of openings the
temporary PIN will work (1 to 255),
then simultaneously press and
release the 0 and 1 buttons. The
garage door opener light will ash
and/or click once.
X1
"CLICK"
TEST FOR SUCCESS: With the garage door closed, enter the temporary PIN you just
programmed and press the HOME button. The garage door opener will open the door.
The test uses up one opening.
NOTE: Use the HOME button to close the garage door. Using the “Openings” temporary
PIN to close the garage door will use up one opening.
NOTE: Clear the temporary PIN by repeating steps 1 through 3, and set the number of
openings to 0 at step3.
X4
"CLICK"
"CLICK"
"CLICK"
"CLICK"
Bekijk gratis de handleiding van Chamberlain CH348C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH348C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8546 MB |
