Handleiding
Je bekijkt pagina 33 van 46
29
USB Hub
Connecting a USB Storage Device
1.
Switch off the TV before connecting any USB
storage device.
2.
Connect your USB storage device to the USB port
of your TV.
3.
Plug the connected devices into the mains socket
4
• Press the standby buttonon the TV or the (!) button
on the remote control to turn on your TV.
5. Press the SOURCE button on the TV or the SOURCE
button on the remote control to display the Source
List. Use the AT buttons to select Media and then
press the OK button to confirm.
Portable
hard Disk
•
If a hard disk is used, make sure its mains adapter is connected to the mains supply.
•
If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption
may exceed SOOmA.
•
The maximum supported storage space of the hard disk is 1TB.
The file system only supports HiSpeed FS, FAT16, FAT32,NTFS formats (NTFS Compressed files are not supported)
.
•
If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not
be less than SMB/s, otherwise the picture and sound of the programme will be affected and a warning statement
will be shown on the screen. If this happens, please upgrade your USB storage device.
•
The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk.This is
normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.
•
Disconnect the USB storage device
if
it is not in use.
,
USB output : DC SV
::-:-:. SOOmA
Common Interface
HDMI USB lVAerial
!=I
•
Mini YPbPr
0
Mini AV
0
Bekijk gratis de handleiding van Cello C20230DVB-LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cello |
| Model | C20230DVB-LED |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 9350 MB |
