CEEM DWI 140 handleiding
Handleiding
Je bekijkt pagina 42 van 83
EN - 15
4.4 Test Strip
Run water
through the
tap (1min.)
Keep the
strip in the
water (1sec)
Shake the
strip.
Wait
(1min.)
Set the hardness level of
your machine
1
2
3
4
5
6
1 minute
1 second
1 minute
NOTE: The factory hardness level setting is “3”. If the water is well water or has a hardness
level above 90 dF, we recommend that you use lter and renement devices.
4.5 Water Hardness Table
Level German dH
French
dF
British
dE
Indicator
1 0-5 0-9 0-6 L1 is shown on the display.
2 6-11 10-20 7-14 L2 is shown on the display.
3 12-17 21-30 15-21 L3 is shown on the display.
4 18-22 31-40 22-28 L4 is shown on the display.
5 23-34 41-60 29-42 L5 is shown on the display.
6 35-50 61-90 43-63 L6 is shown on the display.
4.6 Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To nd out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4.7 Setting
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned
on.
• Hold down the Programme button until “SL” disappears.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Turn o the machine to save the setting.
Bekijk gratis de handleiding van CEEM DWI 140, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CEEM |
| Model | DWI 140 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10953 MB |
