Cecotec Pumba 6000 Purrfect Meal Smart handleiding

Niet gecategoriseerd

Cecotec

53 pagina's

PDF beschikbaar

Handleiding

PUMBA 6000 PURRFECT MEAL SMARTPUMBA 6000 PURRFECT MEAL SMART

4544

ENGLISH ENGLISH

5. CLEANING AND MAINTENANCE

Both the feeder and the desiccant bracket can be removed for cleaning.

Use a damp cloth to wipe dirt from inside the feeder and from the dispensing outlet.

Rinse the parts and air dry them thoroughly before putting them back into the appliance.

NOTE: for the sake of your pet’s health, it is recommended to clean the feeder regularly.

The washable parts of the feeder are: food tank, stainless steel bowl, plastic bracket, lid

(without desiccant bag).

These parts can also be put in the dishwasher or immersed in water.

6. TROUBLESHOOTING

Why can’t I connect to Wi-Fi?

Check that you have connected the device correctly and make sure you select the 2.4G Wi-Fi

option instead of 5G.

Why doesn’t the device dispense food?

- Be sure to ll the tank only with dry food or feed.

- Check if the battery level is low and if the power adapter is connected.

Why are the servings not uniform?

The rst servings may vary, but this does not mean that the appliance is defective. After about

6 meals, servings should even out.

Problem Possible cause Solution

Feeder does not

dispense food

Clogged food in the mechanism

Check for obstructions

and clear them.

Make sure the food is

dry and loose.

Food spills out of the

feeder

Unbalanced or unstable feeder

Place the feeder on a

level surface.

Check if the parts are

correctly assembled.

Low battery indicator

light on No battery

Replace the batteries

with new ones.

Use quality alkaline

batteries.

4. The “Add device” message will appear.

5. Press the “Add” option to add the device.

6. Enter the Wi-Fi network name and password (remember that only the 2.4Gz network can

be selected).

7. Wait for the device to connect and tap the “Done” option to enter the control interface.

Connecting the feeder to the APP manually

1. Add the feeder to the application: after logging into the application, click on the [+] option

in the top right corner to add the feeder, we will go to the “Pet Care” part, look for our

product “Pumba 6000 Purrfect Meal Smart”. Finally, follow the linking steps.

Please note

Make sure your phone is connected to a Wi-Fi network with optimal network speeds.

Establishing a schedule or meal plan

You can set a daily feeding schedule for your pet.

Please note

The device consumes power very quickly, so it is recommended not to use batteries as the only

power source, as the battery will only last about 10 hours.

Tips

1. The battery pack is used as a back-up in case of power failure or power failure. Make sure

to install 4 AA batteries and to plug the device to a power outlet at the same time.

2. It only works with the 2.4Gz network, do not try to connect to the 5Gz network.

3. Try placing the device close to the router during connection to ensure a fast connection.

On food portions depending on your pet, breed, size, and type of food, it is advisable to follow

the table on the food itself or follow the instructions of a professional.

Warning

Do not use canned or wet food.

Please note

If your pet has not eaten the previously scheduled meal, reduce the dose of the next meal.

Bekijk gratis de handleiding van Cecotec Pumba 6000 Purrfect Meal Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.