Cecotec EnergySilence 1090 Skyline Retro Smart handleiding

Ventilator

Cecotec

80 pagina's

PDF beschikbaar

Handleiding

ENERGYSILENCE 1090 SKYLINE RETRO SMART GREEN

ENERGYSILENCE 1090 SKYLINE RETRO SMART WHITE

ENERGYSILENCE 1090 SKYLINE RETRO SMART BLUE

ENGLISH

power cable goes through the hole on the base. Then, place the already assembled base

on its bracket. Tighten it securely with the nut.

4. Pass the power cable from the bottom of the base through the outlet hole.

Parts are shown below in Fig. 2:

1. Nut

2. Base half 1

3. Base half 2

4. Base bracket

4. OPERATION

Fan functions

Control panel

Fig. 3

1. Power icon

2. Speed icon

3. Mode icon: Sleep-Natural-Normal

4. Timer icon

5. Oscillation icon

1. Press the power icon/button to switch on/o the fan. Once switched on, if you press

the speed icon/button , the fan will cycle through the three speeds (Low-Medium-High),

and the corresponding indicator light will light up.

2. Press the oscillation icon/button to activate the oscillation function.

3. When you switch on the fan for the rst time, the mode indicator light will light up,

indicating that the fan is operating in Normal mode. Press the timer icon/button to

select when you want the fan to switch o. This time can range from 0.5 to 12 hours.

4. Press the mode icon/button (Sleep-Natural-Normal) to select the desired mode.

Natural mode

- If, when this mode is selected, the fan is running at High speed, it will alternate between

High, Medium, and Low speeds.

- If, when this mode is selected, the fan is running at Medium speed, it will alternate between

Medium and Low speeds.

- If, when this mode is selected, the fan is running at Low speed, the fan will run at Low

speed and turn o alternately.

Bekijk gratis de handleiding van Cecotec EnergySilence 1090 Skyline Retro Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.