Cecotec Conga Rockstar Wet & Dry Compact Garden Plus handleiding

45 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 22 van 45
CONGA ROCKSTAR WET & DRY COMPACT GARDEN PLUSCONGA ROCKSTAR WET & DRY COMPACT GARDEN PLUS
4342
ENGLISH ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Handle
2. Top cover
3. Power button
4. Inlet
5. Blowing opening
6. Hook
7. Dust collection tank
8. Wheels
9. Floor brush
10. High-eciency lter
11. Tank for liquids
12. 2-in-1 accessory
13. Rigid tube
14. Flexible hose
15. Accessory for corners
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the device if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.
- Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
Box content:
- Conga Rockstar Wet&Dry Compact Plus wet & dry vacuum cleaner
- Floor brush
- Rigid tube
- Flexible hose
- 2-in-1 accessory
- Accessory for corners
3. ASSEMBLY
1. Attach the wheels to the base as shown in Figure 2.
2. Insert the high-eciency lter if you want to vacuum solids or the lter for liquids you
want to vacuum liquids.
3. Place the main body on top of the tank and use the hooks on both sides to secure it in place.
Fig. 3
4. Insert the hose into the Wet&Dry or blowing connector and turn it clockwise to secure it.
Fig. 4
5. Choose the accessory you wish to use and attach it to the exible hose connector.
4. OPERATION
Before switching on the device, make sure that the high-eciency lter when vacuuming
solids or the lter for liquids when vacuuming liquids is properly installed.
1. Insert the end of the hose into the suction or blowing connector, depending on which you
wish to use. Make sure that the hose assembly is properly installed to ensure correct
operation of the device.
2. Connect the device to a mains socket and switch it on by pressing the on/o button.
3. Unplug the device after every use.
5. CLEANING AND MAINTENANCE
- Make sure the device is not plugged to a mains socket before cleaning it or carrying out
maintenance on it.
- Clean the water tank, lers, and main body after every use.
- If the tank lls up during operation, empty it immediately so that it does not aect the
correct operation of the appliance.
- It is recommended to replace the lter after 30-50 hours of use (depending on how it is
used).
- If the device is not going to be used for a long period of time, it is recommended to store
it as described above, in a cool and dry place. Do not store it under direct sunlight or in
damp places.

Bekijk gratis de handleiding van Cecotec Conga Rockstar Wet & Dry Compact Garden Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCecotec
ModelConga Rockstar Wet & Dry Compact Garden Plus
CategorieStofzuiger
TaalNederlands
Grootte4614 MB