Cecotec Bolero Squad I 3300 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224/ 224

Afdrukken

Je bekijkt pagina 76 van 224

76

ENGLISH

Fan noise from the

induction hob.

The fan of the induction hob

helps prevent overheating.

It can continue to run even

after the induction hob has

been switched o.

This is normal and not a cause for

concern. Do not unplug the hob

from the mains if the fan is still

running.

The cookware does

not heat up and the

control panel shows

no indication that the

cookware is on the

hob.

The induction hob cannot

detect the cookware because

the cookware is incompatible.

The induction hob does not

detect the cookware because

it is too small for the cooking

zone or not well centred on it.

Use only cookware compatible

with the induction hob. See the

“Cookware quality” section.

Centre the cookware and make

sure its base matches the size of

the cooking zone.

The induction hob or

a cooking zone has

unexpectedly switched

o, a sound is emitted,

and an error code is

displayed (usually

alternating one or two

digits on the timer

indicator).

Technical fault.

Write down the letters and

numbers of the error, unplug the

induction hob from the mains,

and contact the ocial Cecotec

Technical Support Service.

7. FAULT DISPLAY AND INSPECTION

If a fault occurs, the induction hob will automatically go into protection mode and display the

corresponding fault codes:

Problem Possible causes Possible solution

F3/F4 Induction-coil temperature sensor

fault.

Contact the ocial Cecotec

Technical Support Service.

F9/FA Fault in the temperature sensor of the

IGBT transistor.

Contact the ocial Cecotec

Technical Support Service.

E1/E2

Abnormal supply voltage. Check if the status of the power

supply is normal and if the

induction hob can be switched on

without any issues.

BOLERO SQUAD I 3300/3300 FULLFLEX/4300 FULLFLEX

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224/ 224

Bekijk gratis de handleiding van Cecotec Bolero Squad I 3300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Cecotec (Fornuis)

Handleiding bekijken

Cecotec Bolero Squad I 3300 FullFlex

Fornuis - handleiding

Handleiding bekijken

Cecotec Bolero Squad I 4300 FullFlex

Fornuis - handleiding

Andere merken in Fornuis