Cecotec Bolero Squad I 3300 handleiding

224 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 63 van 224
63
ENGLISH
3. INSTALLATION
Gluing the adhesive sealing gasket
The gasket supplied with the induction hob prevents liquid from seeping into the cabinet
below. The gasket must be carefully glued, as shown in Figure 4. For this purpose:
Clean the surface of the edge of the hob where the sealing gasket is to be tted.
Install the sealing gasket along the outer edge of the induction hob. Make sure that the
end of the cut sealing gasket reaches the end of the hob edge. When cutting the gasket,
try to leave a few extra millimetres. To t the gasket, push the two ends together at a
corner and do not leave a gap between both ends. The sealing gasket must be installed to
1.
2.
ensure that no liquid leaks inside the induction hob.
Installation
-
-
-
The product must be installed by authorised specialists.
The installer must comply with the legislation and standards in force in the country where
the product is to be installed.
The distance between the induction hob and the surrounding walls must be at least 50
mm.
- Figure 5 and the following table show the size for the installation of the induction hob.
Model I
Length (mm)
W
Width (mm)
H
Height (mm)
D
Depth (mm)
03279 590 520 60 56
03280 590 520 60 56
03281 590 520 60 56
Model
A (mm)
B (mm) X (mm)
03279 560 490 Min. 50
03280 560 490 Min. 50
03281 560 490 Min. 50
-
-
When installing the induction hob, there may be a wall or a tall cabinet at the rear or on one
side. Should it be the case, there must not be any furniture or appliances that are higher
than the cooking surface on the opposite side (opposite to the rear or one of the sides).
The installation worktop and the objects close to it must be heat resistant (100 °C). The
sealing gaskets at the edges of the wall must be heat-resistant.
- Do not install the induction hob on top of a dishwasher or a non-ventilated oven.
BOLERO SQUAD I 3300/3300 FULLFLEX/4300 FULLFLEX

Bekijk gratis de handleiding van Cecotec Bolero Squad I 3300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCecotec
ModelBolero Squad I 3300
CategorieFornuis
TaalNederlands
Grootte23158 MB