Cecotec Bolero Hexa C126400 handleiding

Oven

Cecotec

208 pagina's

PDF beschikbaar

Handleiding

/ 208

Je bekijkt pagina 55 van 208

BOLERO HEXA C126400 LINE A / GLASS BLACK A / GLASS WHITE A

ENGLISH

6. Secure the power cable with the cable clamp and close the terminal box cover.

Open the terminal box.

1. With a screwdriver, tighten the screw on the side tabs of the terminal box cover.

2. Unscrew the screws on the side tabs of the cover and remove the latter.

Connecting the power cable to the mains

- Install a standard plug (not included) corresponding to the load indicated on the rating

plate. When connecting the cable directly to the mains, install an omnipolar circuit

breaker with a minimum contact opening of 3 mm between the device and the mains.

The omnipolar circuit breaker must be sized according to the load and comply with the

applicable regulations (the earth wire must not be

- interrupted by the circuit breaker).

- The power supply cable must be routed so that it does not reach a temperature above

50 ºC above room temperature and must be protected by insulation with an appropriate

rating.

Before connecting, check the following:

- The electrical safety of this appliance can only be guaranteed if the oven is correctly and

eectively earthed in accordance with electrical safety regulations. Always make sure

that the ground connection is eective; if in doubt, call a qualied technician to check the

system. Cecotec declines all liability for damage resulting from a system that has not been

grounded.

- Before connecting the appliance to the mains, check that the specications indicated on

the rating plate (on the appliance and/or on the packaging) correspond to those of the

mains supply at home.

- Check that the electrical capacity of the installation and the sockets can withstand the

maximum power of the appliance. If in doubt, contact a qualied technician.

- If the socket and plug of the appliance are not compatible, ask a qualied technician to

replace the socket with a suitable model.

- The latter, in particular, will also have to ensure that the cross-section of the socket cables

is adequate for the power used by the appliance. The use of adapters, multiple sockets

and/or extension leads is not recommended. If their use cannot be avoided, remember to

use only single or multiple adapters and extension leads that comply with current safety

regulations. In these cases, never exceed the maximum current capacity indicated on

the single adapter or extension lead and the maximum power indicated on the multiple

adapter. The plug and socket shall be easily accessible.

Installation of knobs. Fig. 5

1. When unpacking the oven, you will nd one oven without knobs installed and two separate

knobs. 5A

04722_04723_04724_Horno Bolero Hexa C126400 Line A_Glass Black A_IM_AP_01240422.indd 5504722_04723_04724_Horno Bolero Hexa C126400 Line A_Glass Black A_IM_AP_01240422.indd 55 26/4/24 9:0926/4/24 9:09

/ 208

Bekijk gratis de handleiding van Cecotec Bolero Hexa C126400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.