Cecotec Bolero Flux CRE 448000 handleiding

Afzuigkap

Cecotec

79 pagina's

PDF beschikbaar

Handleiding

1312

BOLERO FLUX CRE 448000 INOX A++

BOLERO FLUX CRE 448000 WHITE A++

BOLERO FLUX CRE 448000 INOX A++

BOLERO FLUX CRE 448000 WHITE A++

- Local air discharge regulations must be complied with.

- For safety reasons, only use the supplied xing or mounting

screws (if applicable, depending on the model) or screws

of the same size as those recommended in this instruction

manual.

- You should not use a steam cleaner.

- Never try to put out the re with water. Instead, turn o the

appliance and smother the ame with, e.g., a reproof lid or

blanket.

- Never use extension leads, multiple socket connections or

external timer connection elements.

- If the power cable is damaged, it must be replaced by the

ocial Cecotec Technical Support Service or by similarly

qualied technicians to prevent hazards.

- The appliance must not be operated if the power supply

cable is damaged or cut.

- If the appliance stops working or malfunctions abnormally,

disconnect it from the mains and contact the ocial Cecotec

Technical Support Service.

- Cecotec disclaims all liability for any damage or injury

caused as a result of failure to follow the installation and/or

operating instructions contained in this instruction manual.

- There must be adequate ventilation of the room when the

suspended kitchen hood is used at the same time as gas or

other fuel burning appliances.

- There is a risk of re if cleaning is not carried out according

to the instructions.

- Do not ame under the suspended kitchen hood.

- CAUTION: Accessible parts can become hot when used with

cooking appliances.

- Air must not be discharged into a duct that is used to exhaust

fumes from appliances burning gas or other fuels.

- The minimum distance between the worktop and the lowest

part of the suspended kitchen hood, when it is located above

a gas appliance, must be at least 65 cm. If the installation

instructions for the gas appliance specify a greater distance,

this must be taken into account. The distance of 65 cm can

be reduced for:

o Non-combustible parts of suspended kitchen hoods.

o Parts operating at safety extra-low voltage (provided

that these parts do not give access to live parts if they

are deformed).

- The air discharge regulations must be complied with.

Bekijk gratis de handleiding van Cecotec Bolero Flux CRE 448000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.