Cecotec Bolero Flux CCT 448000 Handleiding (144 Pagina's)

Handleiding

BOLERO FLUX CCT 448000 BLACK/ WHITE/ GLASS BLACK/ GLASS WHITE/ GLASS GREY A++

59

ENGLISH

NOTE: Figure 10 shows the procedure for removing the lter for cleaning.

Cleaning method 1:

Immerse the aluminium lters in hot water (40-50 °C), add neutral detergent and let them

soak for 2 to 3 minutes. Protect yourself with gloves and clean the lters with a soft brush

or scouring pad. Do not apply too much force, as lters are very delicate and can be easily

damaged.

Cleaning method 2:

If you wish, you can also wash the lters in the dishwasher at a temperature of approx. 60 °C.

Carbon lter

- This type of lter has activated carbon and puries air and absorbs cooking odours.

The activated carbon becomes saturated after a period of time, which will reduce the

adsorption capacity of the lter.

NOTE: the carbon lter cannot be washed nor cleaned in any way.

- When the kitchen hood is used regularly, the activated carbon lter should be replaced

every 2-3 months. If frying more frequently, shorten this interval.

1. Remove the aluminium lters.

2. The carbon lters are located on both sides of the motor. Turn the lters, until they

are rmly in place. Fig. 11

3. To replace the carbon lters, proceed in reverse order.

6. TROUBLESHOOTING

Problem Cause Solution

The indicator light is on,

but the motor does not

work

The kitchen hood is obstructed. Remove what is

obstructing the hood.

The condenser is damaged. Replace the condenser.

Motor is jammed or bearing

damaged.

Replace the motor.

Motor is burnt or gives o a bad

smell.

Replace the motor.

Bekijk gratis de handleiding van Cecotec Bolero Flux CCT 448000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.