Cecotec Bolero DressCode Dry 10350 Handleiding (288 Pagina's)

Handleiding

/ 288

Je bekijkt pagina 23 van 288

23

BOLERO DRESSCODE DRY 10350

BOLERO DRESSCODE DRY 10350 STEEL

- ATTENTION: Overheating of the laundry inside the dryer

may occur if you cancel the programme or in case of an

electrical failure during the operation of the dryer. This

concentration of heat can cause combustion, so be sure to

activate the ventilation programme to cool it down or quickly

remove the laundry from the dryer to hang it out to dissipate

the heat.

- Use the dryer only for domestic use and for drying fabrics

labelled as suitable for drying. Any use other than that for

which it is intended is prohibited.

- In case of commercial use, the warranty will be void.

- This appliance is intended for indoor use only and should be

placed on a at and stable surface.

- Do not lean or sit on the dryer door. The dryer could tip over.

- In order to maintain a temperature that does not damage the

laundry (e.g. to prevent the laundry from burning), a cooling

process is started after the drying process. The programme

ends after it. Always remove the laundry immediately at the

end of the programme.

- ATTENTION: Never use the dryer without the lint lter or

with damaged lint lter.

- You must clean the lint lters after every use as indicated in

the “Lint lter cleaning” section.

- The lint lters must be dried every time you clean them with

water. Wet lters can cause a malfunction during the drying

process.

- You should not allow lint to accumulate around the dryer or

in the drum (not applicable to those appliances for outdoor

ventilation of the building).

- IMPORTANT: The space between the dryer and the oor

must not be reduced by objects such as carpets, wood or

panelling, otherwise it will not be possible to ensure

sucient air intake to the appliance.

/ 288

Bekijk gratis de handleiding van Cecotec Bolero DressCode Dry 10350, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.