Cecotec Bolero DressCode 9900 Autodose Inverter FullColor Handleiding (484 Pagina's)

Handleiding

/ 484

Je bekijkt pagina 116 van 484

Bolero DressCode 9900 Autodose Inverter FullColor A

Bolero DressCode 9900 Autodose Inverter FullColor Steel A

Bolero DressCode 9900 Autodose Inverter FullColor Ice Blue A

116

ENGLISH

3. APPLIANCE INSTALLATION

1. Place the device on a at, stable and dry surface. Make sure the product does not stand

on the power cord.

2. Never install it on a soft carpet or wooden oor, or on any kind of mezzanine.

3. The washer may move a little during operation due to overload factors.

4. Avoid direct sunlight and ensure sucient ventilation.

5. Keep the room environment dry and avoid humidity.

6. Remove the cardboard box and the extruded polystyrene packaging.

7. Free the power cable and the drain hose from the rear.

8. Remove any accessories that may be inside the drum, such as the water supply hose,

instruction manual, etc.

9. The washing machine should be operated within a temperature range of 5-40 °C. If used

under 0 °C, the inlet valve and draining system may be damaged.

10. Install the appliance ensuring sucient space around it (Fig. 4):

a: minimum 3 cm.

b: minimum 5 cm.

c: minimum 5 cm on the left side.

d: minimum 5 cm on the right side.

e: minimum 70 cm.

CAUTION: do not allow metal parts of the appliance to come into contact with metal sinks or

other appliances.

Removing the transport screws (Fig. 3)

- The transport bolts must be removed from the backside of the device before using it.

- IMPORTANT: it is imperative to remove the transport screws before the rst use, otherwise

they may damage the drum during the operation of the device.

- The transport screws will be necessary again when moving the product, so make sure they

are kept in a safe place.

- In order to remove the screws:

- Loosen 4 screws with a spanner and then remove them (A).

- Remove the 4 tube spacers (depending on model) (B).

- NOTE: during removal of the transport screws, occasionally the pipe spacers may fall into

the machine, if this happens, they can be accessed by tilting the machine forward and

picking them up from the oor or inside the base of the machine.

- Cover the transport screw holes with the 4 supplied plugs (C).

- Keep the transport screws properly for future use. You will need them again if the washing

machine needs to be moved to another location.

- If it is necessary to transport it to another location:

/ 484

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9900 Autodose Inverter FullColor, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.